Solutions · Manufacturing

AI for your plant, right at the machine

For production plants, food processing and workshops: an assistant that answers from your manuals and procedures and cites the source, reports and orders that do not depend on someone remembering, and an agent that talks to customers and suppliers in Catalan and Spanish.

Book a free diagnosisWalk the line

Video: a robot arm places parts on an assembly line. Video: Pexels

In a plant, money is not lost at the machine: it is lost in the gaps. The alarm nobody knows how to read, the report that arrives late, the order copied by hand.

One line, four stations

Where the time goes, and what we do at each point

Four problems that cost money in any plant: what we automate or help you decide, and how it shows day to day.

  1. 01AI for companies

    The line stopped while someone looks for the manual

    What it costs
    An alarm that does not go off every day, a format change, a quality procedure: the answer exists, but it is in a PDF, in a cabinet or in the head of someone who is off today.
    What we do
    An assistant over your machine manuals, procedures and quality documents. Operators and maintenance ask from a phone or tablet, in Catalan or Spanish, and the answer comes with its source.
    How it shows
    Less time with the machine stopped and less reliance on one person: what your most experienced technician knows is written down and at hand on the night shift too.
    Example

    What does alarm E-14 mean?

    Jaw out of temperature: check the heater before resetting.L2 manual · §6.2
    • Cites the document and section
    • Says "I can't find it" instead of making things up
    • Each person sees only what they should

  2. 02Automation

    The incident report that arrives late, or never

    What it costs
    The incident is noted on paper or in a WhatsApp group and the supervisor hears about it at the end of the shift. Orders that come in by email are copied by hand, and the notice to the supplier depends on someone remembering.
    What we do
    Automatic flows for what is done by hand today: a report made from a phone reaches the right person in order, the emailed order is logged and the supplier notice comes out drafted. Anything going to a customer or supplier is approved by a person first.
    How it shows
    Incidents are seen as they happen and leave a trail, and nobody loses the morning copying orders. Each flow is documented on one page.
    Example
    Report · Line 2Air leak in the cutting cylinder
    1. Logged
    2. Maintenance alerted
    3. Spare part order, awaiting approval
    • Report from a phone, supervisor alerted
    • Emailed orders, logged
    • A person approves what goes out

  3. 03AI agent

    The phone that rings in the middle of a format change

    What it costs
    Customers asking about their order, hauliers, suppliers confirming a delivery. Whoever picks up drops what they were doing, and when nobody can answer, the call is lost.
    What we do
    An agent that answers calls or WhatsApp in Catalan and Spanish, handles the frequent questions, takes the message and alerts the right person, or passes the call to a human. A recording notice at the start, and three recorded test calls before it goes live.
    How it shows
    Calls get answered even when the office is out on the floor, and every message reaches the person who has to deal with it, in writing.
    Example

    Incoming call · supplier

    Message: confirms the film delivery for Thursday

    Alerted: purchasing

    • Catalan, Spanish and a mix of both
    • Hands over to a person when needed
    • Recording and transcript, kept 30 days

  4. 04Custom system

    Every line in a different spreadsheet

    What it costs
    Stoppages, reports and orders live in different places, and to know how the week went someone stitches sheets together by hand. With several lines or plants, the picture arrives when it is too late to decide anything.
    What we do
    A custom web panel per line or per plant, with reports by period, connected through an API to the software you already use and with the document assistant built in. Delivered in phases, with a demo at the end of each.
    How it shows
    One view to decide from: where it stops most, which incidents keep coming back and which orders are waiting.
    Example

    Stoppages by line

    • Line 1
    • Line 2
    • Line 3

    Recurring incidents

    • By line, plant and period
    • API integration with your software
    • In phases, each ending in a demo
Book a free diagnosis

Ask the manual · AI for business

The operator asks in Catalan; the manual is in Spanish

The assistant searches your manuals, procedures and quality documents, answers in the language of whoever asks and says which document and section the answer comes from. Before it goes live, we measure it with real questions from your plant.

  • Cites the document and section of every answer
  • If it is not in the documents, it says so and alerts someone
  • Permissions by group or department
  • A pilot with 3 to 5 people before opening it to the whole plant
How the business assistant works

Manual de la envasadora L2

6.2 Alarmas

E-12
Falta de film. Cambiar la bobina y rearmar desde el panel.
E-14
Mordaza fuera de temperatura. Comprobar la conexión de la resistencia y limpiar el sensor antes de rearmar. Si se repite, avisar a mantenimiento.
E-15
Puerta de protección abierta. Cerrar y rearmar.

Plant assistant · Example

  1. Operator: L'envasadora 2 s'ha aturat amb l'alarma E-14. Què he de revisar?
  2. Assistant: L'E-14 vol dir que la mordassa no arriba a temperatura. Comprova la connexió de la resistència i neteja el sensor abans de rearmar. Si torna a sortir, avisa manteniment. Manual L2 · §6.2
  3. Operator: ¿Y el par de apriete de las mordazas?
  4. Assistant: No lo encuentro en la documentación de la L2. Se lo paso a mantenimiento con tu pregunta.
Example with a made-up machine and manual.

Lab · Example

Counting and checking parts with a camera: try it in your browser

The lab has an object detector that runs in your browser: it follows each object from frame to frame and counts the ones that cross a line, without the image leaving your device.

It is trained on everyday objects, not on your parts or their defects. If visual inspection or counting fits your plant, we look into it in the diagnosis.

See the detection demo
Counting lineParts counted8OKOKCheckOKOK
Example illustration: not the output of a model.

We start with one case, and measure it before it goes live

Nothing opens to the whole plant on day one. We pick what wastes the most time, test it with the people who will use it and widen it once it works.

  1. Free assessment

    We see where the time goes

    We talk about your line, your documents and your calls, and we tell you what makes sense to automate. If nothing is needed, we tell you that too.

  2. AI for companies

    Real questions, correct answers

    For the assistant we agree with you on 20 to 50 real questions from the plant, each with its correct answer. It is measured before going live and every month after.

  3. Custom system

    In phases, with a demo in each

    First a few people on the floor use it; then everyone else. The panel and the integrations come in phases, and each phase ends with a demo.

Book a free diagnosisWhat a custom system includes

What we do not do

  • Train your own models or fine-tune existing ones
  • Install on your servers or supply hardware
  • Integrate software with no API and no export
  • Let an agent decide alone on money, contracts or customer data

Your documents

  • Servers in the EU
  • AI providers are data processors under contract and do not train on your data
  • The data and the configuration are yours

Frequently asked questions

What happens if the answer is not in the manuals?

The assistant says it cannot find it instead of inventing an answer, and the question is logged. Unanswered questions show what is missing from the documents.

Can operators ask in Catalan?

Yes. The assistant and the call agent understand Catalan, Spanish and a mix of both, and reply in the language of whoever asks, even if the manual is in another one.

Do I have to change my ERP or software?

No. It connects through an API to what you already use. If a program has no API and no export, it cannot be integrated, and we tell you so in the diagnosis.

Can it detect defects in my parts?

There is no model trained on part defects today. What you can try is the lab's detector, which follows and counts everyday objects. If visual inspection fits your plant, we look into it in the diagnosis.

Try the detection demo
Do my manuals and procedures leave the company?

They are processed on a server in the EU, and AI providers are data processors under contract and do not train on your data. If some documents cannot leave, a local model is costed separately in the proposal.

Who approves what is sent to customers or suppliers?

A person on your team. The agents prepare the order, the notice or the reply, but nothing leaves the company or changes data without someone approving it.

Tell us where your plant stops

A conversation about your line and, afterwards, a summary of what makes sense to automate, or the answer that nothing is needed.

Book a free diagnosis